How to replace parts of VAPME Shisha?

Hey there, fellow shisha enthusiasts! I'm a supplier of VAPME Shisha, and I know how frustrating it can be when parts of your shisha start acting up. But don't worry, I'm here to walk you through the process of replacing those parts like a pro.

VAPME Shisha 25000 Puffs Vape

Why Replace Parts?

First off, you might be wondering why you'd even need to replace parts of your VAPME Shisha. Well, over time, normal wear and tear can take a toll on your shisha. The coil might burn out, the tank could crack, or the mouthpiece might get dirty beyond cleaning. Replacing these parts not only extends the life of your shisha but also ensures you're getting the best vaping experience possible.

Tools You'll Need

Before we dive into the replacement process, let's talk about the tools you'll need. You don't need a fancy toolbox for this. A small Phillips head screwdriver is usually all you'll need for most VAPME Shisha models. Some models might require a pair of tweezers or a small Allen key, but that's about it. Make sure you have these tools handy before you start.

Identifying the Parts

The first step in replacing parts is knowing what you're looking for. VAPME Shisha comes in different models, like the VAPME StarX 25000 Puffs, VAPME Shisha 15000 Puffs, and VAPME Shisha Pro Max 20000 Puffs. Each model might have slightly different parts, but the basic components are usually the same.

Coil: This is the part that heats up the e - liquid to create vapor. If your shisha isn't producing as much vapor as it used to, or if the vapor tastes burnt, the coil might need to be replaced.
Tank: The tank holds the e - liquid. If you notice a leak or if the tank is cracked, it's time for a new one.
Mouthpiece: The mouthpiece is what you inhale from. It can get dirty over time, and if it's damaged or you just want a change, you can replace it.
Battery: If your shisha isn't holding a charge or isn't powering on, the battery might be the culprit.

Replacing the Coil

Let's start with replacing the coil. This is one of the most common parts that need to be changed.

Turn off your shisha: Safety first! Make sure your shisha is turned off before you start working on it.
Remove the tank: Unscrew the tank from the base of the shisha. Be careful not to spill any e - liquid.
Locate the coil: Inside the tank, you'll see the coil. It's usually a small, cylindrical part with wires attached to it.
Unscrew the old coil: Use your small Phillips head screwdriver to unscrew the old coil from the tank. Be gentle so you don't damage the tank.
Install the new coil: Take your new coil and screw it into the tank in the same place where the old one was. Make sure it's tightened properly but don't over - tighten it.
Prime the new coil: Before you start using your shisha again, you need to prime the new coil. Drip a few drops of e - liquid onto the coil to soak it. This helps prevent a burnt taste.
Reattach the tank: Screw the tank back onto the base of the shisha.

Replacing the Tank

If your tank is cracked or leaking, here's how you can replace it.

Empty the e - liquid: If there's any e - liquid left in the tank, pour it out carefully.
Remove the tank: Unscrew the tank from the base of the shisha.
Disconnect any wires or connectors: Some tanks might have wires or connectors attached to them. Use your tweezers or screwdriver to disconnect them.
Install the new tank: Take your new tank and connect any wires or connectors if necessary. Then, screw the tank onto the base of the shisha.
Fill the new tank: Fill the new tank with your favorite e - liquid. Make sure not to overfill it.

Replacing the Mouthpiece

The mouthpiece is easy to replace.

Remove the old mouthpiece: Simply pull the old mouthpiece off the top of the shisha.
Clean the area: Wipe the area where the mouthpiece was attached to remove any dirt or residue.
Install the new mouthpiece: Take your new mouthpiece and push it onto the top of the shisha until it fits snugly.

Replacing the Battery

If your shisha's battery isn't working properly, here's what you can do.

Check if it's removable: Not all VAPME Shisha models have removable batteries. If your model does, look for a battery compartment on the shisha.
Open the battery compartment: Use your screwdriver or a small tool to open the battery compartment.
Remove the old battery: Take out the old battery carefully. Make sure you note the correct orientation of the battery.
Install the new battery: Place the new battery into the compartment in the same orientation as the old one.
Close the battery compartment: Screw the battery compartment back closed.

Tips and Tricks

Keep spare parts on hand: It's a good idea to keep some spare coils, tanks, mouthpieces, and batteries in case something goes wrong.
Read the manual: Each VAPME Shisha model might have specific instructions for replacing parts. Make sure you read the manual that came with your shisha.
Clean your shisha regularly: Regular cleaning can prevent parts from wearing out too quickly.

Contact for Purchase

If you're in need of replacement parts for your VAPME Shisha or if you're interested in purchasing new VAPME Shisha products, don't hesitate to reach out. We have a wide range of parts and products available to meet your vaping needs. Whether you're looking for a new coil for your VAPME StarX 25000 Puffs or a whole new VAPME Shisha Pro Max 20000 Puffs, we've got you covered. Let's start a conversation about your vaping requirements!